ALI PLC

MrPLC Member
  • Content count

    10
  • Joined

  • Last visited

Community Reputation

0 Neutral

About ALI PLC

  • Rank
    Sparky

Profile Information

  • Country Iraq
  1. Triconex work station

    Dear Friends I have new job in next week , this job required logic modified for Triconex work station , they have some problem with some logic loops , I worked before with Simatic S7 V5.5 & Rockwell automation RSlogix5000 & RSlogix500 , FTV & Wincc I needs your help to know more about Triconex work station & Tristation 1131 , did I can get the software  then I can get some training before starting my job  Waiting your kindly help   Best Regards Ali
  2. S7-400H Redundant Confogration

    Dear Expert Is necessary to have both CPU (Master & Slave) same program blocks or only master PLC should have S7-program with blocks  Best Regards Ali 
  3. ML1400 Analog I/O PID

    Dear My Friend I have on project with 1 analog input and 1 analog output , I need to get analog input from load cell transmitter (4..20mA) and delayed these value 40 sec then i must be multiple this value with another value and send it to Pump AC drive to controlled the pump flow example if I have in the first sec. analog IN ( 31200-250KG ) i must dallied 40 sec then send 10 V to motor AC drive for flow controlled if I have in the second sec. analog input (29950- 240KG)i must dallied 40 sec then send 9.6 V to motor AC drive for flow controlled this will be continuous to shutdown plant I can do this with classic instruction (TON , MOV , MUL , DIV ) but Is possible to Use PID to do this equation Please any friend can help me with this function Many Thanks Ali
  4. Multi ML1400 to main panel View Plus 12.1HMI

    MANY THANKS FOR HELP
  5. Multi ML1400 to main panel View Plus 12.1HMI

    Dear Msp Thank you for reply, the total tags about 200 bool states and 80 integerdata For the time is not critical I needs the main HMI reads states in each 1..3 seconed I read some info. About MSG instructions I thing isnt very difficult, I thing I can use it to collcet the states in main plc 1769-L23E its accepted 32 CIP connection And connectthe Panel. View Pluse HMI to main PLC by serial port and connect the other 10 plc also through Ethernet port to read some Bool tags Best regards Ali
  6. Multi ML1400 to main panel View Plus 12.1HMI

    Dear MSP The Model Number is 2711P-T12C4D8 , , I have No proble with pages I needs 10 Page in Maximum , for your suggest to use MSG , did this large quantity of MSG orders will be Delayed the system ? I have No long experience with MSG instruction , I can 1 PLC compactlogix L23E to communicate with 20 ML1400 PLC and connect theis CPX PLC to HMI , Please if you have some example to MSG instruction and Mapping to communicate between ML1400 & Compact Logix PLC Best Regards Ali
  7. Dear All I needs your experience I needs to monitoring & control 21 ML1400 PLC by 1 HMI Panel View Plus 12.1 Inch (factory Talk vie ME ) through the Ethernet Port in each ML1400 and I will use the Management Hub switch from AB Any Help will be Highly Appreciated Best Regards ALi
  8. Dear All I planned to install Compact logix network consisted of : 1 main station 1769-L35E with 3 loacal expansion 20 Remote I/O station each station consisted of : 1 1734-AENTR 4 1734-IB8 2 1734-OB8 1 1734-IE2C 1 HMI thats mean I will have 41 TCP/IP nodes , did I needs added anoth control net to keep normally speed for network waiting your help Best regards Ali
  9. CompactLogix Ethernet Remote IO

    Dear All I planned to install Compact logix network consisted of : 1 main station 1769-L35E with 3 loacal expansion 20 Remote I/O station each station consisted of : 1 1734-AENTR 4 1734-IB8 2 1734-OB8 1 1734-IE2C 1 HMI thats mean I will have 41 TCP/IP nodes , did I needs added anoth control net to keep normally speed for network waiting your help Best regards Ali
  10. Dear Friend I would like to controlled 20 Filter backwashing station by using 1 PLC type 1769-L36E with accepted 48 Node connections I planning to use 1734-AENTR for each node each node will be include 1 1734-AENTR 4 1734-IB8 2 1734-OB8 1 1734-IE2C My problem I needs to connect 20 HMI to Main PLC adding to 1 main HMI thats mean I will have 41 Nodes , Is that large number of nodes will effect the PLC processor ? I needs your advice Best Regards Ali