Muhammad Ali Zahid

MrPLC Member
  • Content count

    5
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Muhammad Ali Zahid

  • Rank
    Newbie
  • Birthday 09/17/89

Profile Information

  • Gender Male
  • Country Pakistan
  1. factorytalk(RSlinx Enterprise) with SLC 5/2 Comm. error

    thank you dear it works i have browsed tags from tag database then make a shortcut with the same name which i enter to call tag database and associate this shortcut with the menually added plc slc 5/02 .... thank you alot dear its really help full
  2. connect to network use wireshark software to identify connected IPs in network
  3. Is there any option to make 2 factory talk S.E servers redundant so that if one server down other server send data Factory Talk S.E Clients...?? kindly help If YES then what other software's are needed to make FACTORY TALK S.E servers REDUNDANT
  4. hi everyone, I'm trying to setup communication between a PV600 (with 2711p-rn3 DH485 COMM module) and a slc500 5/02 plc. I'm using a direct cable to connect both nodes. i'm using FTview studio and in the rslinx enterprise setup, in target tab i've added SERIAL-DH485 driver instead of DH485 and i've add a device "slc 500/02" at node 1, adding a shorcut to it. The SLC channel 0 is configured as node 1 @19200bps and the driver at the rslinx enterprise is @ 19200bps too. i'm usng the following syntax to access slc variables: {::[shorcutname]N7:3}, for example. Anyway, i've download the application to the PV600 and it apperas that the comm mudule does't respond. the comm leds on the pv and on the slc are both off. The questions are: 1- the driver for 2711p-rn3 DH485 COMM module is the SERIAL-DH485 OR THE DH-485? 2 - IS the SYNTAX correct? 3 - do you see any other problems on my configs? Thanks for any help. best regards