minhdam06102

MrPLC Member
  • Content count

    23
  • Joined

  • Last visited

Community Reputation

0 Neutral

About minhdam06102

  • Rank
    Sparky

Profile Information

  • Country Vietnam
  1. How to simmulate GT designer 3 by using GX works2

    Dear Mr/Ms, If for GT works 3 and GX works 2 is it OK? for the same way to simulate? Best regards,
  2. Connect cable for Q02H cpu

    Dear Mr, Thanks for your information. I used printer cable it is ok for PLC. best retards,
  3. Dear Mr/Ms, I using GT designer 3 to simulate have to use GX developer. But I can not install GX developer, just using GX works2. So Can I connect GX works 2 and GT designer 3 to simulate.. Please help me to slove this problem.. Thanks & best regards,
  4. Connect cable for Q02H cpu

    Dear Mr/Ms, For that question I will answer as: Cable for programmer PLC not for touchscreen. I have already used Omron PLC program cable 4pin for PLC Q02H mitsubishi that work correctly and I program that now is OK. Cable R2 with USB that is another option for program QPLC. Mini usb cable use for HMI Thanks & best regards,
  5. RS logix5000

    Dear Mr/Ms, Anyone if you have link to RSlogix5000 please tell me. Thanks & best regards,
  6. analog signal to 2 module

    Dear Mr, We use mitsubishi Q series Q02H, analog module is Q68ADI. for 2 panel is the same type but 2PLC not comment 0VDC and 24VDC. But if we not use analog separate( 1in to 2out) accessories. We just want to connect by wiring to reduce the cost. Would you please tell me how to do that. Thanks & best regards,
  7. 1 analog signal for 2 analog module

    Dear Mr, Thanks for your help. Best regards,
  8. Dear Mr/Ms, I have an ultrasonic sensor with 4-20mA analog signal output. But I have 2 control panel with 2 PLC separate, two PLC have analog input module . Can I send signal for 2 analog module of 2 PLC with one sensor? If can how can I make them - Analog signal will connect analog (+) and analog (-)with module analog of 1st PLC and then from that terminal (analog terminal of 1st PLC) wiring to analog (+) and analog (-) of 2nd PLC ? or - Analog signal from sensor (+) will connect with (+) analog 1st PLC then (-) analog of 1st PLC will connect with (+) of 2nd PLC then (-) 2nd PLC will connect with (-) sensor ? or - Analog signal from sensor (+) will connect with (-) analog 1st PLC then (+) analog of 1st PLC will connect with (-) of 2nd PLC then (+) 2nd PLC will connect with (-) sensor ? Would you please help me to solve this? Thanks & best regards,
  9. analog signal to 2 module

    Dear Mr/Ms, I have an ultrasonic sensor with 4-20mA analog signal output. But I have 2 control panel with 2 PLC separate, two PLC have analog input module . Can I send signal for 2 analog module of 2 PLC with one sensor? If can how can I make them - Analog signal will connect analog (+) and analog (-)with module analog of 1st PLC and then from that terminal (analog terminal of 1st PLC) wiring to analog (+) and analog (-) of 2nd PLC ? or - Analog signal from sensor (+) will connect with (+) analog 1st PLC then (-) analog of 1st PLC will connect with (+) of 2nd PLC then (-) 2nd PLC will connect with (-) sensor ? or - Analog signal from sensor (+) will connect with (-) analog 1st PLC then (+) analog of 1st PLC will connect with (-) of 2nd PLC then (+) 2nd PLC will connect with (-) sensor ? Would you please help me to solve this? Thanks & best regards,
  10. 1 analog signal for 2 analog module

    Dear Mr/Ms, I have an ultrasonic sensor with 4-20mA analog signal output. But I have 2 control panel with 2 PLC separate, two PLC have analog input module . Can I send signal for 2 analog module of 2 PLC with one sensor? If can how can I make them - Analog signal will connect analog (+) and analog (-)with module analog of 1st PLC and then from that terminal (analog terminal of 1st PLC) wiring to analog (+) and analog (-) of 2nd PLC ? or - Analog signal from sensor (+) will connect with (+) analog 1st PLC then (-) analog of 1st PLC will connect with (+) of 2nd PLC then (-) 2nd PLC will connect with (-) sensor ? or - Analog signal from sensor (+) will connect with (-) analog 1st PLC then (+) analog of 1st PLC will connect with (-) of 2nd PLC then (+) 2nd PLC will connect with (-) sensor ? Would you please help me to solve this? Thanks & best regards,
  11. Connect cable for Q02H cpu

    Dear Mr, I have an cable for Onron PLC ang HMI as picture below. Can I use it for Q02H CPU? Please hep me to know that? Best regards,
  12. Connect cable for Q02H cpu

    Dear Mr, USB port but I dont know model for cable? Please tell me if you know!. Usually i use SC-06 cable-USB. But now i dont have it. Best regards,
  13. Connect cable for Q02H cpu

    Dear Mr/ Ms, I have a Q02H CPU and GX works software. If I want to connect them and without SC-06 cable how can I do. But I have cable use for Omron PLC I can use for Mitsubishi? I can How can I download driver for cable? Please help me to slove this!!!! Best regards,
  14. High speed counter

    Dear Mr Sparky, Thanks for your help. I see some structure so i will try it. Best regards,
  15. High speed counter

    Dear Mr Sparky, But CP1E and CP1H may be not support interrupt INT. How can we program it? Thanks & best regards,