raph_rf

thank you i choosen eplan select

Is there any Solidwork electrical user on this forum?

From schematic to layout/reports/printing markers? wich is the best?

Hello I have a project with 11 axes of motion hydrolithe/motorship. I have two options now:, from Schneider &siemens : - siemens D435-2 with software simotion scout -the new Schneider lmc078 with somachine motion Did you have some experience with these ones? Do you have any advice? It's my first motion project..

Hello I need to do a design with a PLC for logic of my machine, I will have : -1 station of 20-25 IO and two other remote of 20-25 I/O. -Communication ethernet ip between this plc and a motion controller(Parker 6 axis). This PLC will control this motion controller(sequence of the program) -One bus for the receiver(radio remote control):CAN-Bus, Profibus-DP, RS232/485, DeviceNet, Profinet. -HMI -Huge program to implement(Control the motion controler, look up tables, two vision camera for positionning and mesuring, 5-8 PIDs, hard to estimate but i will have a long sequence program) -I will need sd card for flashing and/or datalog(for future) -I will need a web server(for future) -More compact possible For the software: -Not too huge software -intuitive -fast programming -easy simulation I never tryed s7-1200. I already tried in 3 years ago the S7-300(I found it complicated, and TIA portal quite heavy), some person told me that the S7-1200 is easier. Never heard about the mitsubishi L series... I also think about Phoenix contact ILC 191... I tried in 2 years ago Schneider M238 & Somachine (As TIA, I found it quite heavyn not too intuitive and slow for downloading ect.) Do you have some advice or good/bad experience? I choosed theses three brand for the good after sale service of the dealers here(Siemens,Mitsubishi & Phoenix) Thank you and scuse me for the bad english

is it an ''odd'' question? or there are few Eplan user here?

ok it's probably due to my bad english, usualy eplan take is cross referance with a header with letter in the top of the page and a header with number at the right of the page. By example, a crossreference in eplan is : 4-B6 (page 4-column B line 6) I dont want this type of reference, I want to do by example, in a page 11x17, three ladder diagram with uniques row number. Each wire on a row take the number of the row, same for components. I putted two example here: An another example of the easy to find cross reference: In other words, i dont want to do ''european style'' control diagram, i want to do a north american ladder diagram.. Is it possible to do a template like this in Eplan or Solidwork electrical?

nobody here???

Hello, There is someone who can explain me how to do a ladder with lines number in EPlan P8(for control)? Thanks a lot