raulvirtudazo
MrPLC Member-
Content count
25 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by raulvirtudazo
-
Hello Guys, Good day i countered SL500 CPU, i can't go online because the program was password protected, can you help me please...I don't have any offline backup program. Thank you so much....
-
CLX OUT OF MEMORY
raulvirtudazo replied to raulvirtudazo's topic in Allen Bradley / Rockwell Automation
Dear Ron, Thank you so much... I believe you suggestion it can help a lot of me.. once again thank you so much...I will try this.... -
Hello Everyone, I need your help badly, I have Controllogix CPU and redundant system, before when i try to edit it is working after 3 months i made more addition logic and this error always appear. OUT OF LOGIC MEMORY IN THE CONTROLLER. I have two attachment photos for your reference. thank you so much........ ERROR.bmp PLC_Error.zip
-
Hello everyone, I have new PC windows 7 64 bits i try to installed RS Linx 2.58 after i restart the pc it won't work any one cant help me pls....Thank You so much...By the way I'm using old activation key..
-
Hello Guy, Hi i need your help i have MVI94_MCM has already installed. The existing configuration is Start Read_Data is 700 and the Read_data count is 42 this configuration is working well. Then i edit Read_Data count into 150 then i download it was successful. I create a copy file in the controllogix Read_Data[50] why there no data comming from this address but in the prosoft module there is. Thank you so much......
-
Hi Gaz. Just make a timer instead TON then make a TOF timer. the tof is from your preset value down to zero.
-
Hello.. guy good day to all. can i ask a favor? because this is my first time to in counter ABB PLC any one how to know to back-up the program. Than You so much...
-
Dear all, Hello everyone, i need your help regarding my PC. i have a windows 7 OS in my pc and i installed VMware V7.1 an i all successfully installed my all Allen Bradley Software but when i put my PCIS hardware it wont detect in the XP OS in VMware no PCI detection.. pls give me an advice how can i make this into possible...thank you so much...
-
Can you give your system drawing? so i can see where the master or slave location. and what brand your master and the brand your slave...
-
Modbus TRU in contrologix rack
raulvirtudazo replied to hamza's topic in Allen Bradley / Rockwell Automation
Hello Hamza, I'll just finish this kind of problem last week , its working well now. You can run the Prosoft Module even without the ADD-ON. you can copy the sample program in Irax CD of prosoft. you find there your prosoft module model Ex: MVI56-MCM-E there is sample for Master and Salve. Then you can edit that as your main program. You can email me if you have other question. raulvirtudazo@gmail.com -
Hello everyone, Please help me.... I have ControLogix PLC of Allen Bradley and im using Prosoft MCM-MVI56 module. But i already used this before the prosoft ist working, for now im try connect my prosoft module to 3500/92 module of Bently Nevada but doesn't work. please help me..
-
Hello everyone, I need your help pls......i have prosoft mvi56-mcm module i already confgure the port1 In master mode its working.. but i try to configure port2 in master mode also it doesn't work. Almost same configuretion in port1.. pls i need support to me. Thanks you so much..
-
Connect to an AB Logix5555 via 1756-ENBT?
raulvirtudazo replied to ilarson007's topic in Allen Bradley / Rockwell Automation
Hi, You computer is Windows 7 OS. you must intalled RSLinx 2.58 version or higher the lower on that it doesen't work. -
SoftLogix5800 Ethernet/ip
raulvirtudazo replied to raulvirtudazo's topic in Allen Bradley / Rockwell Automation
Hello Ken, Thank Yuo so much of your wonderful advise to me. the problem was, my windows firewall was not disable. now my 1794-AENT adapter is working well...Thank you so much....... -
Dear To All, I would like to ask your help regarding my problem, I have RsLogix5000 Software and SoftLogix5800 Controller, I have also a hardware Flex I/O Ethernet adapter 1794-AENT. I had already try to configure, Using SoftLogix5800 Ethernet/IP. But the communacation is fualted. Please help me how to solve these.
-
SoftLogix5800 Ethernet/ip
raulvirtudazo replied to raulvirtudazo's topic in Allen Bradley / Rockwell Automation
-
Hello guys, i need you badly. I have a Contrologix processor with a remote I/O using flex I/Os with Irax prosoft module MVI94-MCM. I try to replaced a new module because my old module is faulted, but my new module it dosen't work please help me how to configure my MVI94-MCM prosoft module....
-
Hello Guy, Any one can help me? How to use DB and FB or can you give me a sample program? thank you so much.
-
Installing RSLogix 5000 on Windows-7 Ultimate
raulvirtudazo replied to rajsiyer's topic in Allen Bradley / Rockwell Automation
No need to install VMware in Windows 7 for RSlogix5000 just install RSLinx 2.58 then every thing will be ok... i already try that in our laptop and PC..... -
Installing RSLogix 5000 on Windows-7 Ultimate
raulvirtudazo replied to rajsiyer's topic in Allen Bradley / Rockwell Automation
-
Hello Guys, Pls. help me about my PLC problem. the is the error Out of Logix Memory in the controller. I used 1756-L61 ControlLogix5561 Controller.
-
-
ryrr
-
Please Help me how to update my RsLogix5000 V16 to V20