RVaughan

MrPLC Member
 View profile  See their activity

  • Content count

    10

  • Joined

  • Last visited

Posts posted by RVaughan

  2. Posted · Edited by RVaughan

    Input cards, DI8x24VDC BA, 6ES7 131-6BF01-0AA0, NEW in box ,quantity 10

    IO-Link CD-Master 4SI SIRIUS, 3RK1 005-0LB00-0AA0, NEW in box, quantity 4

    IO-Link Master 4SI IO-Link, 6ES7 138-4GA50-0AB0, NEW in box, quantity 3

    IO-Link Communication Module, CM 4xIO-Link, 6ES7 137-6BD00-0AB0, NEW in box, quantity 1

    CM AS-Master ST, 3RK7 137-6SA00-0BC1, New in box, quantity 1

     

    Located in USA.  Make offer, shipping included.

     

    Pictures available on request, send email address in a PM.

  3. Posted · Edited by RVaughan

    I have the following for sale,

    Automating with Step7 in STL and SCL (S7-300/400 controllers) 6th Edition 2012, Very good Condition

    Automating with Step7 in LAD and FBD (S7-300/400 controllers) 4th edition, New Condition in plastic

    Automating with SIMATIC (Controllers, Software, Programming data Communication, Operator Control, and Process Monitoring), 4th edition 2009, Excellent condition

    Automating with the SIMATIC S5-135U, 3rd revised edition 1993, Very good condion.

     

    Located in USA.  Make offer, I cover shipping.

    Pictures available on request, send email address in a PM.

     

    Update 07 March 2022, still for sale.

  4. Posted

    Is there a manual or guide that details the acceptance test procedure? Customer requires System Acceptance Test on their automation cell with safety PLC (CPU 319-F PN/DP). How is this test performed? The Distributed Safety Engineering class manual and SIMATIC Industrial Software S7 Distributed Safety Programming and Operating Manual give some information, but not enough to say an acceptance test has been performed. For example, section 11.2.2 of the Programming and Operating Manual, page 317, point #3 states "Check whether the version of S7 Distributed Safety used to compile the safety program corresponds to the version in Annex 1 of the Certification Report". Where is this Certification Report? I have found a Annex 1 of the Report to the Certificate Z10 09 07 67803 004 Safety-Related Programmable Systems SIMATIC S7 F/FH Systems Report No.: SN73321C-A1 Revision 3.18 dated 2014-03-21. Is this the correct report? Section 11.2.1 of the Programming and Operating Manual, page 315, point #1 states "Check the parameters of the F-CPU in the printout." And point #2 states "Check the safety-related parameters of all configured F-I/O in the printout." What are these parameters being checked against?

  6. Posted

    As is so often the case, I found the answer shortly after asking the question. It seems I didn't notice my reference data was filtered. For posterity and future seekers here it is: From SIMATIC Manager, Options>Reference Data>Display (Or Ctrl+Alt+R) Choose Cross-References If your desired reference data type is not displayed, click the filter/pencil icon or go to View>Filter Check your desired reference data type (Inputs in my case) and click OK. The table will show whick blocks reference your data.

  8. Posted

    The way I understand your question, and please correct me if I'm wrong, is that you want the same program that's in the machine, but you want everything in english, and you're wondering if the hardware will accept the English program. If so then yes, the hardware will take the program. I believe there is a language setting internal to the PLC that the integrator will have to change beforehand. If you already have the program translated, you're looking at a rather simple operation.