proviton

Hello all. Finally my final year project was successful done. Here i attached the video to share with all of you. I would like to give special thanks to all of the forum's member that was help me solved my problem. The parking area has three levels with a parking slot for second and third level respectively. In this project, there are total of 12 inputs and eight outputs that have been used to control the system. There are three proximity sensors as the inputs to detect the present of car at the conveyor, three photoelectric sensors to detect the level, one proximity sensor at entrance, one emergency push button and three push buttons to start and remove the car respectively. While there are four DC geared motors as the output to control up and down of the elevator and move in and out of the car to the slots. The control system adopts PLC as controller and used ladder diagram as the program part. The PLC that has been used is OMRON while the software for ladder diagram is CX-programmer and the software for HMI is CX-Designer.’

Hello all. I have a problem when I try to TEST>CONNECT TO PLC, the diagram not appear. What should I do? For information, I use CP1E-N20 OMRON. Here I attached the picture. picture below show the diagram that suppose appear. Picture below show that the diagram not appear. This is my problem. Here is my setting. Is it something wrong? Thanks in advance

Brother PDL, I really appreciate your help. But I still cannot fix the problem. However, my problem solved after i install it at other laptop. I don't understand why my netbook can't support it although i was 3 times format it and install the cx-one. I think the problem is maybe at my netbook. Thanks for your help. I appreciate it. Now i used the different laptop. Best regards, proviton.

Brother Michael Waish, I don't understand your explanation, can you guide me in details? For information, i use CP1E-N20. The connection that i use is via USB. Thanks in advance.

Dear brother PdL & Michael Walsh, Thank you for your reply. I just select .cxe type file in order to open at version 9.1 (like brother pdl told).

Hello all, I have the problem. I can't TEST via connect to PLC. Why? Can somebody help me? Thanks in advance.

hello all. I have the problem to use the ladder program that i was written using CX PROGRAMMER 1.0 to be use at CX-PROGRAMMER 9.1. The type of files are like this - .cxe (for version 1.0) - .cxp (for version 9.1) What can i do to solve my problem? thanks in advance.

Dear Michael Walsh & ChinthanaW, I just received the trial CD for CX-ONE from OMRON after got advised from Mr. Michael Walsh. I really appreciate your help, Thanks and regars.

Hello all. I'm final year student and now doing final year project. I want to ask, is it possible to me to get trial version for cx-designer? Coz i was already try to google but i cant find it. Can anyone please help me? Thanks in advanced

Dear Mr.Michael Walsh, Alhamdulillah. I have understand it. I really appreciate your help! Thank you very much, brother =)

Dear Jay Anthony, Thank you for replying my message. The model is : OMRON CPIE-N20DT-D output 8 input 12 Thank you

Hello, I want to find how to insert the FLAG MEMORY in the ladder diagram? I don't sure whether this term is correct or not. When I use Siemens LOGO COMFORT the term that be use is FLAG. I put the picture as example. Please see at the picture. normally, 0 = Start push button the one that not has any sign = Stop button 1000= this is FLAG (from my term) the 1000 is not the output. It just the memory in the PLC. how can i insert kind of this in the ladder diagram CX Programer? Thank you.