automationtechie

Our TPD and VPD series Touchpads have the ability to communicate to Modbus TCP slave devices.  We offer models from 2.8" to 7" touchscreens.  the configuration software is free to use.  They also provide Scaling, virtual tags which can be used for mathematical or logic function and the ability to use ladder logic for simple control features. For Modbus TCP communication, please be sure to select a model which has an Ethernet port.  Touchpad Controllers

We have a software package called EZ Datalogger.  It is free to use for up to 64 tags when you use one of our Data Acquisition modules.  A license can be purchased if you have your own DAQ modules or if you have more than 64 IO tags.  EZ Datalogger runs on a Windows PC and can communicate to most Modbus TCP and Modbus RTU devices.  Our Modbus TCP selection guide can be found at the following link: Modbus TCP Data Acquisition Modules The steps for data logging are: 1) Configure your Modbus TCP slave IP address for your network 2) Configure the IO channel types and verify data is read properly using Web interface 3) Install EZ Datalogger on your PC 4) Create a Modbus TCP connection to your DAQ device by entering the IP address of the Slave 5) Add your Modbus TCP slave device by selecting the Model or entering the Modbus register types and counts 6)Add channels which you would like to be stored in Data log to the channel list 7) Adjust sampling period and data log storage path if necessary (sampling period is 1 second by default and a new file will be created every 24 hours 8) Click on start to begin data logging. If we can answer any questions, please feel free to contact us at tech@icpdas-usa.com

We also have a newer version which  also has drivers for  Windows 10, Windows 8/8.1 and Linux.  This converter not only converts USB to RS-485 but also converts USB to either RS-232 or RS-422.  It is USB powered and din rail mountable. http://www.icpdas-usa.com/i_7561u.html

You can also use Indusoft's SMA think client.  It works for IPAD, Android and any HTML5 browser.  http://www.icpdas-usa.com/indusoft_studio_mobile_access_sma_thin_clients.html  

Our free client tool works for both Modbus TCP and Modbus RTU slave devices.  Give it a try and provide feedback.  http://www.icpdas-usa.com/documents/modbus/modbus_master_tool.zip

We have a new series of EtherCAT compatible Remote IO modules. www.icpdas-usa.com/search-result-daq.php?Ethercat=Ethercat&submit=search

We have over 20 combination of Modbus TCP remote IO modules. If we can answer any questions, please feel free to contact us. http://www.icpdas-usa.com/et7000table.php

Hi All, We have a free Modbus Master Utility that you can use to test communcation to your Modbus Slave modules and PLC. Please let us know your feedback. http://www.icpdas-usa.com/documents/modbus/modbus_master_tool.zip If we can help with any future projects, with remote IO, controllers or communicaiton, please feel free to contact us.

Once you have your sensor, our WISE controller will make integration easy. It uses IF-Then-Else logic and requires no additional software purchase. http://www.icpdas-usa.com/wise_7160.html If we can help with any questions, please feel free to contact us at tech@icpdas-usa.com.

Hi Sparky, I am not familar with the Delta PLC but if it follows the Generic Modbus TCP standard, you can follow the guide for our ET modules. https://www.icpdas-usa.com/documents/labview_modbus_eng.pdf In the future, if you require additional IO, you can connect in the same way using our ET series modules http://www.icpdas-usa.com/et7000table.php.

The Adam-5069 does not support Modbus TCP; unless the rack system that you plug it into converter the Modbus RTU data to Modbus TCP. We have a simpler solution. Using our ET-7067. It is a Modbus TCP slave device which can be added to your SCADA system. http://www.icpdas-usa.com/et_7067.html To enable the safe values, you simply connect to the module with IE or Chrome and set the safe value on the web configuraion page.

We have Ethernet IP AI Data aquisition modules which can read in 0- 10 VDC inputs http://www.icpdas-usa.com/eip_2017.html Page 37 of the manual shows the simple setup.

We have a new Ethernet IP to Modbus RTU gateway for connecting your AB PLC to your old modbus RTU devices. http://www.icpdas-usa.com/products.php?PID=3811

We have a programmable relay that requires no programming skills or software to configure. The WISE-7901 is programmed within a web browser. The output modules can be selected to have a variety different I/O choices. I have chosed our X107 which has 6 DI and 7 DO. Please visit these links for more information: Product information: http://wise.icpdas-usa.com/documents/WISE%20v1%201%20Release%20News%20_en.pdf The product page: http://wise.icpdas-usa.com/products.php?PID=3585 The output board http://www.icpdas-usa.com/products.php?PID=321

Hi Mike, I know it is probly a little late. We have a USB to Hart converter with free software for configuration. Here's a link. http://www.icpdas-usa.com/products.php?PID=3821 If you did already take care of this, I am curious as to what solution you did use and the extent of its success.

We excited to intorduce our new ICP DAS Touchpad controller. It is a miniature HMI which fits where a standard light switch is mounted. We currently have 2 version: Modbus TCP and Modbus RTU. For the Modbus TCP version, we can communicate with 3rd party Modbus devices. For more information, please follow the link below. www.icpdas-usa.com

Hi all, Please feel free to try our free demo version of King View or King SCADA. We offer free tech support. If you have any questions, please feel free to email or call us. King View is for Small to Medium projects http://www.icpdas-usa.com/king_view.php King SCADA is for larger projects and those in which you would like enhanced graphics. http://www.icpdas-usa.com/king_scada.php

Our WISE series controllers will send up to 12 different predefined Email messages based on inputs to the controller. These can be sent to your cel phone by email to text functions of your cel phone. For instance for verizon, you can send an SMS to you cel phone by emailing it to phone#@vtext.com. It can even send input and output conditions and analog input values. They are programmed with IF THEN ELSE logic so it is very easy to do. There are 12 versions but this one seems to have a nice mix of all types of IO WISE-7126 by ICP DAS http://www.icpdas-usa.com/products.php?PID=3580

Hi Sparky, We have a specialzed product for Building Automation. I works especially well with LonWorks. The product is KingBuilding. It is a specially designed version of KingView. We have several application stories. Please take a look at our literature. http://www.icpdas-usa.com/king_view.php If you would like to discuss this, please contact us.

I had the same problem a couple of years ago. My new laptop did not have a serial port. We started using the Omron OEM version of the USB to Serial converter for programming using Syswin and later CX Programmer then CX One. Worked fine for the Omron products but later when we switched to PLC direct, they did not work. We used what my system integrator uses for all of his PLC's and it works every time. They say it has auto-tuning built in. I just know it works and works well. I-7561

I want one.....I recently set up a Maple Systems HMI5056Nto work with my ICP DAS I-7188EGfor monitoring 6 zones of temperature and controlling them. Since I have used Maple Systems before, I called tech support at ICP and they walked me through this in about 30 minutes. Now you are telling me I can do this remotely. Sweet!!!!