Crossbow

MrPLC Admin
  • Content count

    4829
  • Joined

  • Last visited

Community Reputation

119 Excellent

About Crossbow

  • Rank
    Fully Automated!

Contact Methods

  • ICQ 0

Profile Information

  • Gender Male
  • Location Edge of Insanity
  • Country United States
  1. CX-Spervisor Dev V3 WANTED TO BUY

    Replied to your post in For Sale. http://industrial.omron.us http://www.orn247.com You can look up an authorized distributor there.  
  2. You should contact Omron and find a local distributor.  http://industrial.omron.us or www.omron247.com will get you local support in North and South America.
  3. B&R Automation Studio 4.3 DLL error

    Have you searched to make sure that DLL file is on the PC? Can you check a PC where it works and see if the size or file date are the same or different? Quick Internet search led me to this: The mfc140.dll file is part of the Microsoft Visual C++ 2015 Redistributable Update 3 RC package.To resolve the issue: Download the package from Microsoft Visual C++ 2015 Redistributable Update 3 RC. Install the package by running the downloaded .exe file.
  4. simulator for S7-200 Siemens Simatic PLC

    The programming software for that unit had simulation.  Check with Siemens.
  5. NEXGENIE 1000 Communication

    Sorry that product isn't sold outside India, you won't find much help on it here...
  6. timer question

    Could be a limitation of that CPU, those J CPUs are really basic.
  7. PX DEVELOPER

    PX Developer was for process CPUs, not the one you have.  You need GX Works2 or GX Works3.
  8. CX-One v9.4 TRIAL VERSION DOWNLOAD

    No special procedure, mount the ISO file as a drive letter and run setup. When you say you can't install it, how about some details on the error message?  What does it say?  What version of Windows?  Some info on your PC? Nothing can be debugged with 'it didn't work'...
  9. gp pro ex proface

    Can't be certain, no experience with ProFace, but with some I have worked with it means the controller and the HMI are not communicating, so it won't draw them and not be able to show controller data.
  10. serial number C-more 6.21

    Glad to hear they helped you out!
  11. Remote IO

    Provide the part number on the I/O card.  with the door open i can't see what type of module you are using.  Can't tell what network it is. But as far as what the switches are set for, that's pretty obvious, they are labeled.  It's setting a network node number in binary.  Since 2 and 4 are on, that's node 6.
  12. I don't think it will cause a problem.  I recall you said the LinMot acted strangely.  I'm curious what the results will be, but can't imagine it would hurt anything.  With the immediate stop, try using the immediate stop and servo off, that should prevent any motion once it decels to a stop.
  13. serial number C-more 6.21

    Sharing serial numbers is software piracy.  The terms of service you agreed to when you signed onto this site forbid it, and typically accounts will be banned for such discussions.  Contact tech support to see what they can do about your upgrade.
  14. MC_Stop includes deceleration, and is your normal method to stop an axis.  I have never seen a case where that function block creates and error. MC_ImmediateStop does not include deceleration.  It's an instant hard stop.  And MC_ImmediateStop will always place the axis in error when done, to prevent further operation until MC_Reset is issued.  It can also be configured to turn the servo off or reset following error when it completes.   That's all in the programming manual details for the function blocks. I can't think of a single reason to have the output from the stop block trigger the immediate stop block.  That example seems fairly stupid.  Keep in mind too that when an axis shows an error, it likely is already stopped or being stopped.  They don't run with a minor fault, but can with an observation.
  15. No Online Edits?

    kannappan, please make your own posts in the future.  This topic has nothing to do with GX Works3 and simulation, and it's over 3 years old.