Jacen

As IO_Rack allready said: The rack mounted LK201 should NOT be mounted in either of the two slots to the left of the CPU or on a remote rack. And you put it on the first spot left of the CPU. Try to put il elsewhere

Hi, I do not think that the absence of one slave can stop the communication with another, only slow it. For the instance and attribute, you can find them in the documentation of the DeviceNet Card I539-E1-03 I attach the section about that (CIMR-F7Z = 3G3RV). I do not see the P1-03 in it but the register #602 gives instance 06 and attribute 02 Hope this help Best regards, 3G3RV-Param.pdf

Hi, It is right that the C200H-PRO27 is discontinued. The only programming consoles available are the CQM1-PRO01 and the CQM1H-PRO01. But they cannot replace the PRO27 for all the PLC. Regards,

Hi, If you want to use a computer, you need the unit 3G2C7-LK201 and the software Syswin or LSS (but 3G2C7-LK201 is no more available in Europe). CX-Programmer does not support the C28K You can also use your PRO27, but with the adapter 3G2A5-AP003 and the cable C200H-CN222 or C200H-CN422. Regards,

The operation manual of the CV500-LK201 explains how to do with the old CVSS software. But i do not think you can change the CPU Bus speed. According to the manual the card uses the values in the PC’s CPU Bus Unit System Setup (section 2.2) W205_E1_04_CV500_LK201_Operation_Manual.pdf

Hi, I cannot help you because i do not have the card to make test, but this is a document written by the french technical support (so in french, sorry) about this card. hope this help STA12_C200HW_PCU01_Condense.pdf

It seems that only the Lite version is presently available in Europe (for CP1E) But as the CP1E is in the V3 full version, the full V4 is delayed.

Nothing about the release date but something about the content R134_E1_08_CX_OneV4_News.pdf