mr.Nilson-Brasil

GX-Developer

Hi, Help me! I have applied to operate using analog drive FX3U-4DA, but I do not know how to use positioning. Could you please tell me, indicating that the instruction command has Positioning with analog output? Have any examples? I never did with analog application. Thanks

Hi, Can someone help me. CPU usage serie A A273UHCPU [A3UCPU] - Indicating a HMI GT1050-QBBD hours and minutes of machine working? - How to compare a particular event with the working hours of the day [ex.: A turn-6:00 to 14:00 hrs; B turn-14:00 to 22:00 hrs; C turn-22:00 to 6:00 hrs] - Do not have much knowledge in the CPU series, if possible guide me about the use of education. Thanys! Alguem pode me ajudar. Uso CPU serie A A273UHCPU [A3UCPU] - Como indicar numa HMI GT1050-QBBD hora e minuto de maquina trabalhando? - Como comparar um determinado evento com as horas de trabalho do dia [ex.: turno A- 6:00 as 14:00hrs; turno B- 14:00 as 22:00hrs; turno C- 22:00 as 6:00hrs] - Nao tenho muito conhecimento em CPU serie A, se possivel me orientar quanto ao uso correto da instrução.

1 – PASSO (step) ALTA VELOCIDADE SPINDLE, PARA FURAÇÃO HIGH SPEED ON THE SPINDLE FOR DRILLING. 2 – PASSO (step) DIMINUI VELOCIDADE DE AVANÇO DE EIXOS NA PEÇA MAS MANTÉM ALTA ROTAÇÃO NO SPINDLE. THE SPEED WAS DECREASED IN THE AXIS FEED, BUT KEEP THE HIGH SPINDLE SPEED 3 – PASSO (step) NO ROSQUEAMENTO SINCRONIZO O AVANÇO COM GIRO DO SPINDLE (VELOCIDADE DE CORTE CONSTANTE). IN THE THREADING I’VE AN SINCRONYZED FEED WITH SPINDLE TURNING(SPEED CONSTANT CUTTING) O RETORNO É SINCRONIZADO ATÉ SAIR DA PEÇA PARA NÃO DANIFICAR A ROSCA. THE RETURNS IS SINCRONYZED UNTIL GO OUT OF PIECE FOR NOT DAMAGE THE THREAD. thanks

Hello! Does anyone have any example of application for machine type screw, servo and linear motion in the frequency inverter into rotary motion to the thread and return without damage. - I have 2 applications, one with FX3G, by using the SPD and other application with MR - MQ170 for 5 independent axles each with its own encoder. Thanks

Hello! Can someone tell me if the software MITSUBISHI [GT-works2, GX-DEVELOPER, MT-Developer2, FR-Configurator, MR-Configurator and other] work on the Windows 7? thanks

Hi, I have little experience with PLC MITSUBISHI (FX3G) I want to make 10 recipes (maximum) x 6 items, and I intend to do in the PLC. Can someone give me an example of application, and I will use MOV and registry R and pointer thanks!