-
Content count
23 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by RDA
-
it could be the decimal separator, the tup pc is set dome vigola, while you want it as a point, the red zones are those with the decimal digits.
-
2 HMI connect to M221 ?
RDA replied to Jimmylove007's topic in Modicon / Telemecanique / Schneider Electric
Certainly everyone is doing his job -
2 HMI connect to M221 ?
RDA replied to Jimmylove007's topic in Modicon / Telemecanique / Schneider Electric
you can not plc need to be slave with the panel you have to put a plc with ethernet port and connect the 2 hmi via switch Regards -
Run the files to a friend who has the software, and at the time of printing it does it on pdf files.
-
Check statue of Read_Var connection OK or NOT ??
RDA replied to moamed's topic in Modicon / Telemecanique / Schneider Electric
-
no I'm trying to connect one of the serial Modbus slaves plc simulated using the funcion TXD e RXD.
-
HALLO THER IN SOMEON WHO HAS OPERADEC CX SIMULATOR WITH SERIAL EMULATED COM DE REALLY TURNS ON COM PC DE PC WHERE THE SIMULATOR? THANK YOU
-
i tried tested, the serial work as slaves nt link, also function if com cx simulator and mode "display", as "real com" does non work, where i'm wrong. Greeting.
-
Sorry my language, repeat the question, do you know the simulator cx send the serial pc which is turning the control that are written in the plc and posted on serial such as e txd rxd
-
FRON TEST DONE THAT I SEE THOW IT WORK THE SIMULATOR AD SLAVES SERIAL AND WORK IF COM CONFIGURED AS SISPLAY
-
the real time clok rtc two are indipendent
-
Modicon TSX Micro 3721001 - CPU Fault - Modules or Base Unit?
RDA replied to andyz's topic in Modicon / Telemecanique / Schneider Electric
If probleam and software that he expired and maybe did a useless work and money spent. Under all circumstances however, you must have the source code to be downloaded into the new CPU -
hello navigators anyone has ever tried with cx simulator to simulate the network with eternet query from another external PC turns to where cx simulator?
-
TRANSFERT THE #0 IF COMUNICATION ON TROUBLE
-
simultaneously read and write to a slave Twido
RDA replied to Leo's topic in Modicon / Telemecanique / Schneider Electric
do something simpler alternative measures of reading and writing with the system bit %S6 and see if it works in order to understand if the communication parameters are ok, after passing to increase the speed of queries -
What is the best logic to control the flow and temperature?
RDA replied to Elyas_gh's topic in Modicon / Telemecanique / Schneider Electric
sorry for my english, most likely it will not work well from the point of view of plant mechatronic ideal is to have a 3-way valve that works in mixing with one pid regulator that controls the output mix. -
Hi, test control cx protocoll if in case of error on a communication loop and active the jump to the next step or if you and stalling
-
indirect adressing of bits and words in a function block
RDA replied to GooF's topic in CX-Programmer
FUN 534 "OUT BIT" -
Zelio Smart relay Communication
RDA replied to Selo Ginanjar's topic in Modicon / Telemecanique / Schneider Electric
PIN 4 A+ PIN 5 B- -
Saluti
-
ATTENTION THE ATTACHED FILE AND TO HAVE OMRON MASTER ON NET MODBUS TCIP, THE FILE THAT I ATTACH YOU YOU/HE/SHE HAS BEEN SIMPLIFIED IN HOW MUCH ONLY IP A PUTS ON THE OUTSIDE OF THE FB. YOU/HE/SHE HAS BEEN MADE A WILL WITH POSITIVE RESULT WITH OMRON MASTER AND MODICON (M340) SLAVES TCIP_CJ1.cxp
-
Sorry this being the files Modbus_TCP_FB.zip
-
Quando dici Che hai la rete a bordo vuol dire Che devi andate in altro TCIP Modbus o? Saluti