cadengineer1

MrPLC Member
  • Content count

    4
  • Joined

  • Last visited

Community Reputation

0 Neutral

About cadengineer1

  • Rank
    Hi, I am New!

Profile Information

  • Country United Kingdom
  1. Omron C200-CPU02

    Thanks Jay, Spot-on. Regards, Brian.
  2. Omron C200-CPU02

    I have just acquired another C200H-CPU02 and ME431 and set it up on a spare backplane with a couple of I/O units and an LK201. I have uploaded and run a couple of test programmes and all is working fine; however when the hand held programmer is used the language shown in the display is in Japanese. I have never come across a CPU02 before and cannot find a manual for it, could be for the Japanese market only? Does anyone know if it’s possible to; and if so how to change the language to English? Regards, Brian.
  3. Omron LK202 Host Link

    Hi, Thank you very much for the in-depth information, but just looking at the cabling information in the LK202 manual it looks another device required between the LK202 and PC?. I have trawled the web but can only see cable pin outs for LK202 to various devices e.g. NT touch screen display but not direct to PC Is it possible to connect direct between LK202 & PC. Regards, Brian.
  4. Omron LK202 Host Link

    I am in the process of resurrecting an old C200H-BC051 PLC, I have Syswin 3.4 programming software and would like to know if I can communicate via an LK202 host link unit mounted on the backplane as I have a spare slot next to the PLC. If communication is possible with the LK202 unit where could I find the cable configuration for the 9 pin connectors? If the above is not possible what are the other options for upload/download to PLC from PC? Regards, Brian.