Steve Bailey

MrPLC Member
  • Content count

    808
  • Joined

  • Last visited

Files posted by Steve Bailey

  1. GEK-25398.pdf

    GE Fanuc Series Six ASCII BASIC (ABM) Manual.
    A coprocessor module with a Z80 CPU, 64K RAM, and a BASIC interpreter. A Commodore 64 for your PLC!

    1540 downloads

    Submitted

  2. Series One Junior Manual

    Hardware and programming manual for the old GE Fanuc Series One Junior. This was a Koyo product that was never marketed by TI after they took over the product line nor by Koyo after they started PLC Direct (later Automation Direct).
    It uses the s

    4112 downloads

    Updated

  3. Automation Direct Process Simulations

    Updated 6 December 2004. Per requests I have added ladder logic to go along with the simulation. It's in a separate pdf file so if you want to try writing your own code just ignore it.
    This is a simulation of a tank fill/drain system. The s

    4200 downloads

    Updated

  4. GE Fanuc Process Simulations

    Updated 6 December 2004. Per requests I have added ladder logic to go along with the simulation. It's in a separate pdf file so if you want to try writing your own code just ignore it.
    This is a simulation of a tank fill/drain system. The s

    7742 downloads

    Updated

  5. Logicmaster Six Manual

    User's Manual for Logicmaster Six software

    6657 downloads

    Updated

  6. GE Fanuc Series Five I/O Modules GFK-0123

    Series Five I/O Module specs and wiring.

    2083 downloads

    Updated

  7. GE Fanuc Series Five Data Communications

    Series Five serial communications manual

    2498 downloads

    Updated

  8. GE Fanuc Series Five Genius Bus Controller GFK-0248

    Genius Bus Controller manual for the Series Five

    1842 downloads

    Updated

  9. GE Fanuc Series Five GFK-0023

    Series Five User's manual. This is zipped because the pdf file is 49 meg.

    2403 downloads

    Updated

  10. GE Fanuc Logicmaster Five GFK-0122

    User's manual for Logicmaster Five programming software.

    3302 downloads

    Updated

  11. GEFComm.zip

    VB application including source code for SNP communications.

    2184 downloads

    Updated

  12. Series Six Plus Manual

    User's manual for the old Series Six Plus PLC. This manual is not available from the GE Fanuc website.

    2936 downloads

    Updated

  13. GE Fanuc Series One Plus Manual

    Just what the title says. The Series One Plus is the same animal as the TI305 and the Automation Direct DL305.

    8712 downloads

    Updated

  14. PanelMate Samples

    Three sample PanelMate configurations for Chris Elston.
    Unzip them to C:\Pmconfig\Online\Cfg\
    Then run the PanelMate configuration software and import them into the database.

    828 downloads

    Updated

  15. RTU Process Simulation

    This is a simulation of a tank fill/drain system. The simulation runs on your PC while connected to a PLC. When the PLC program turns on the pump the simulation shows the tank level increasing. The simulation also sets and clears discrete inputs represe

    3246 downloads

    Updated