fgcastro

MrPLC Member
  • Content count

    37
  • Joined

  • Last visited

Community Reputation

0 Neutral

About fgcastro

  • Rank
    Sparky

Contact Methods

  • ICQ 0
  1. FX1S-30MR-ES/UL

    Recently a friend of mine gave me a FX1S-30MR-ES/UL PLC. He, however, told me one of the outputs was not working. Is there a way of checking the outputs ? I do not have the interface software. Thank you for your input Felipe
  2. ON/OFF Button

    I am using either a DL06 or a DL260 CPU and I did take a look at the universal flip-flop thread in PLC.net. Thank you
  3. ON/OFF Button

    Yes b_carlton. The intent is to learn and roll my own code. Thank you
  4. ON/OFF Button

    I am new to PLC programming and I am breaking my head trying to program a single button to turn ON and OFF a light. Can someone give me a clue ? Thank you
  5. LooKout Direct Demo

    I am getting an "Unable to initialize link! Link 260Kseq probably doesn't exist" What I do next is to modify the driver object in my application (DL1) and select a link I know am using in the ladder logic program I working on. I still get the same message in the alarms window.
  6. LooKout Direct Demo

    I have trying LookOut Direct Demo version now for over a week. Suddenly it seems that the screen I was using for testing does not communicate with PLC (DL260) anymore. Is this because it is a demo ? Even though they don't say it, does it not only not run with over 10 points and stops after an hour but it stops running after a period of time ? I have tried the tool here at the office and my supervisor and collegue technicians have seen a good use for the tool, but I was stopped with this issue. I am trying to sell the idea of buying the complete developer version. Anything you can share to help me sell the idea of buying the software is appreciated. Thank you.
  7. CQM1H-CPU51

    Hello. Maybe sonmebody can help me with the following: I need to build a communication cable for the serial communication port on the above mentioned PLC. Does any body have the pin layout for the connectors? Thank you
  8. CX-Supervisor

    Hello. Does anybody know where I can download the CX-Supervisor 1.22(9) upgrade ? Thank you.
  9. Cx-supervisor Device Handle Is Invalid

    Thank you anonymous.
  10. Cx-supervisor Device Handle Is Invalid

    Yes, anonymous the '.cdm' file is created. I always change the '*.cdm' file from within CX-Supervisor. The only possibility left like you mention is that the file is corrupt. Is there any way I can check this before deleting and recreating the file ? Thanks
  11. Cx-supervisor Device Handle Is Invalid

    I am sorry anonymous. I got the numbers swapped around. CX-Server 2.3
  12. Cx-supervisor Device Handle Is Invalid

    Hello anonymous. Yes, I am connected to the PLC with CX-Programmer. The PLC type is CJ1H-H CPU65. The PLC type in the CX-Supervisor project is CJ1H-H CPU65 as well.
  13. If I run CX-Programmer 6.0 and then try to run a CX-Supervisor 1.25(4) application I get the following error message: Device handle is invalid. The convert feature saids "The open PLC handle is invalid" What does this mean and how to correct it ? Thank you for your help.
  14. CX-Supervisor

    I am getting the following message in the Error Log Window: TIMEOUT/other communication error: PLC3, [CX-Server:DEVICE, COMMS_FAILED, 0X8A1B]. How do I go about solving the problem ? where do I start ? Thank you for your help.
  15. Controller Link

    As far as I know datalink provides a way of sharing data between PLC's by defining shared memory areas (CIO, DM etc). Does the definition of these shared memory areas work one way ? In other words, do you define the shared memory areas from the sending PLC. If you have two PLC's in a controller link network, do you just setup datalinik areas on PLC1 and the other PLC will be able to read these memory areas ? Thank you.