shehoxs

MrPLC Member
  • Content count

    64
  • Joined

  • Last visited

Posts posted by shehoxs


  1. This machine don't use hmi.and stand alone if you  see the ladder ,it seems there is no problem?.that will make me sure,that i didnot lose step in the ladder.and save for me to force off if power on.


  2. ok,thank u for your helping me.

    On this screen short , red rectangle ..in my ladder we find M517 (NC) ,but i can't find where is coil (or Source)M517

    i trace step by step , i never know where is this source(m517).

    miss.PNG


  3. So ....i am loss ladder on step between  222 to 224?.if true..,this broken from download process ,or hide by owner program,...or may be...this step saved on eeprom?.


  4. I don,t know what hapen,..(i can't explain).with replace cable serial to usb bafo with profilix.(adapter serial to usb). My sc09 out to pc is rs232(db9). I can complate read from plc until end prog. Thank your attention for solve my problem.but way on step 222 (red cyrcle) like brake rung. Its nomar or not?. 

    what wrong.jpg


  5. In my chase...after power plc on, and machine run properly. Then i make new project and choose fxu/fx2c on gx dev..,afther that ,i online then read from plc..and proccess upload from plc to my pc.but i can't get complate, always brake on step 1304.  What wrong on my proccessing upload from this plc?.


  6. Ok thank,u ,to day i try upload to my pc with fx2c, and proccess stop on step 1304 ,what hapen, never complate to upload to pc?. Can i upload to pc without eeprom place in fx plc?.in my case this plc without eeprom,but have battery on there.


  7. My gx not suport for fx  and on plc don't have eeprom. I don't know, this from machine not include eeprom ,but have battery on there. or eeprom loose from plc.


  8. Never Succes Upload from PLC to MEDOC v2.4, always brake on step 1302,always have massage invalid intruction found.
    Upload from PLC to PC ..never done,succes full.Please help me,,what happen?.


  9. In fx-64mr ,used medoc, i found instruction like pic,icant read on leader program, and found error if test, error is step 1304 too big.so if i want to upload from medoc file to plc have error invalid intruction. How to read intruction in leader and how to uploaded this file to fx-plc. Note: this file i get from fx-plc. I am download via medoc(plc to medoc).

    IMG_20170827_180202_BURST5.jpg


  10. comunication that PLC(plc problem) with new HMI is well, and I tray change HMI on the other machine (good PLC and old hmi) with New HMI don't have problem. On the PLC (bad PLC) just have problem on comunication with PC, look like protected for comunication with PC

  11. thanks for your attention on my computer i am using windows 98 and and on my pc have cx, lg, and gx, but if I tray other machine have same PLC (A1SJ CPU -s3) comunication good not have problem for upload and download or monitor bichause on that machine still have original HMI (from the vendor machine) and on the machine(problem with PLC) ,the HMI is change with news HMI F940WGOT-TWD-E conection plc to hmi used conector on right side rack plc

  12. Please Helpme as soon as Conection PC to PLC I am used cable SC09 (Red colour) have problem communication (for Upload or Download) From Medoc V2.4 (PC) to PLC A1SJ CPU-S3 (massage on medoc is Transfer Pending) I tray change cpu type from A1SJ(H) with A1S on medoc have same Problem on my PLC unit have 1pcs A1SD61 for high speed counter and comunication plc to HMI use conector on right side rack PLC please helme for solve my problem top urgent, tanks very much fo your help Best regards shehoxs

  13. Hi, How to change FX epron 8 to FX eeprom 8 On FX1PLC? Just Plug in or need configure Setup On PLC, if configuration on Setup How to do it that? And how to Downloading Program to PLC with eeprom8, just dwon loading use GXdefeloper like Downloading program sesion?. Best regards