BobB
MrPLC Member-
Content count
2155 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by BobB
-
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this and are unable to assist.
-
Use an old camera to format it.
-
Oh bugger - not too bad I trust.
-
The only way you will know what the problem is connect to the PLC and check the error log.
-
Inputs start at channel 0 - outputs start at channel 100 for that PLC. So inputs will be channels 0 & 1 - outputs will be channels 100 & 101. Inputs are orange and outputs are yellow - standard with Omron. Inputs are ID - outputs are OD. Hope that helps you sort out your issues. Yes - the first input card is part of the processor. That PLC was discontinued many years ago by the way.
-
Proecssor and what is in slots. Varies with processor.
-
I have not seen one of these for many a long year - thought they had all died. Memory is fading. Somewhere in the software there should be a MOV function I think to move the screen page number into the notify area then the screen will change to that page. Hope this helps. As the PT Control Area is D0000 do a search for that address - it should appear multiple times to change the page on the screen.
-
I wish to use the alarm buzzer in an NS screen. I have not been able to find how to do what I want to do. There are about 200 alarms programmed into the screen from a PLC but I only require to use the buzzer for about 8 of them. The buzzer would also need to be muted. Any help appreciated.
-
Nothing in my mail box.
-
Hi proud Kiwi I bet after the test result today LOL. Will not let me allocate SB13 or map to a PLC bit - HELP!!!!
-
Thank you - will give it a go.
-
This has been answered elsewhere - poster by a different name?
-
USB would be the best bet for mine. It should work easily.
-
Here you go. These are rotary switch unit numbers. I guess this is what you are looking for.
-
Yes - there is TST and TSTn (test not).
-
There are several Omron drivers for Citect. OMFINS I think is an old one that is why I suggested you have a look at this one. I could find them all easily on the old website - the Aveva website is a pain in the you know what!
-
Have you had look at this? https://softwaresupportsp.aveva.com/#/producthub/details?id=abe15288-1322-4707-e2a5-08d8f5e80cc6 I am over the Aveva website crap to be honest - the old website was much better and easier to navigata. hope this helps.
-
Google - easy. https://www.google.com/search?client=firefox-b-d&q=arial+unicode+ms+font
-
First check the cable - pin 1 is negative and pin 2 is positive on the Omron side if I remember correctly.
-
It just means always on.
-
Here is a link to the Gautami font - download it and install in Windows on your laptop/computer. Similar for the bold form. https://fontzone.net/font-details/gautami
-
It could well be a firmware version issue. Check to see if there is a difference in the firmware with Omron. Easiest way would be to take a pic of the label and send to Omron.