All Activity

This stream auto-updates   

  1. Today
  2. juniorkgtech started following Optimal Сasual Dating - Actual Women
  3. Not against spontaneous decisions, one night only Authentic Maidens Exemplary Сasual Dating
  4. ibansanmartin joined the community

  5. Communication Problem S7-1200

    zubair136 replied to zubair136's topic in Siemens

    one thing i forgot to mention . siemens plc is reading the modules of fatek plc 

  6. Communication Problem S7-1200

    zubair136 posted a topic in Siemens

    Dear Experts,  i am facing a problem regarding plc to plc communication .  i have 2 plc that are communicating through industrial switch . one plc is s7-1200 and second is Fatek FBS-40ma with FBS-CBE ethernet bd card.   both plc are connected to an ethernet industrial switch. Siemens HMi is also connected to that industrial switch as well.    i have both plc programs back up. everything is running smooth but i want both plc as back up. so i bought both plc same model new one.   i have replaced the siemens plc with a new one and inserted program in it . everything works fine. but when i replace fatek plc with new one with program . siemens doesnot communicate with fatek.   any suggestion will be a life saving   

  7. Tia Portal Program Upload Error

    zubair136 replied to zubair136's topic in Siemens

    thanks all for your help. it was a version issue 
  8. zubair136 liked a post in a topic: Tia Portal Program Upload Error
  9. zubair136 liked a post in a topic: Tia Portal Program Upload Error
  10. VasylCh started following Super Сasual Dating - True Females
  11. Spontaneous adult encounters Authentic Ladies Supreme Сasual Dating
  12. Mitsuba@96 joined the community
  13. Yesterday
  14. DonNH liked a post in a topic: Communication between NX PLCs

  15. NX1P2 CPU Clock Speed?

    photovoltaic replied to skyfox's topic in NJ Series / Sysmac Studio

    I could probably find out for you - but why would you need this out of curiosity?
  16. photovoltaic started following NX1P2 CPU Clock Speed?
  17. Does anyone know what the clock speed of NX1P2 CPU is? I could not find this info anywhere. Cheers!
  18. Here.. DRAGSILL_LH_20171013_UPP.pdf
  19. I replied to your PM.
  20. mikeyarrow started following RSS to pdf conversion

  21. RSS to pdf conversion

    mikeyarrow replied to JPS's topic in Allen Bradley / Rockwell Automation

    Hi I am new here. I see that some people have had the same issue I have. Is there anyone who can make this file into a PDF DRAGSILL_LH_20171013_upp.RSS
  22. VAU_RMA started following Detect CF memory card activity

  23. Detect CF memory card activity

    VAU_RMA posted a topic in Omron

    Hi! I'm looking for a way to detect if/when a backup has been made to the CF memory card and a way to detect if a backup has been written from the CF memory card to the PLC memory. A counter, a time/date, etc? In short: detect backup and/or restore Application: Trigger an audit log event on a seperate system Any known solutions?
  24. The Firmware is 1.290  (Attached photo) Thanks for the diagnostics codes. Image (1).jfif
  25. Gambit started following Simple CPU Communication TCP Time out

  26. Simple CPU Communication TCP Time out

    Gambit replied to HZ's topic in Mitsubishi

    Which Firmware are you running ?   As for Dianostics:

  27. Buttons with graphics in NA

    tulip replied to j.brophy@corkillsystems's topic in NJ Series / Sysmac Studio

    I know this is an old post, but I don't think with the NA screens you can overlap two buttons. Only one button will work, the one in front. I've tried this in the past and couldn't get it to work like it does on the NB screens. Maybe someone can correct me if I'm wrong.
  28. tulip started following Buttons with graphics in NA
  29. Hi! A have a question about how can I send the current User data from the Panelview (HMI) to the PLC. Its an allen bradley PLC 1756 L71. In the Factory Talk view I tried to make a register and to move in it the current user, but unfortunatelly its not working. Is anybody here who can help me with this ? Thanks ahead. Br.
  30. 야동주소모음 링크고.COM 야동 주소모음 changed their profile photo
  31. 드라마 시청률 순위 링크고.COM changed their profile photo
  32. Last week
  33. alan_505 started following FactoryTalkView- CurrentLanguage to PLC
  34. Can you not add an invisible button that writes to the PLC when you press the language change button.
  35. 무료웹툰 링크고.COM 무료 웹툰 changed their profile photo
  36. Yes, it is Modbus TCP/IP

  37. Simple CPU Communication TCP Time out

    Goran Vuckovic replied to HZ's topic in Mitsubishi

    Port 502 - is it Modbus TCP/IP?

  38. How to Connect Beijer E300 Terminal to Mitsubishi FX5U

    Goran Vuckovic replied to Schellenberger's topic in Mitsubishi

    I'm in process of connecting E200 to FX5U, and it seems that, even with FX5-422-BD it is not possible. Most likely I will change HMI driver to Modbus RTU and adapt both apps.
  39. Is it possible to connect an old Beijer E300 terminal to a Mitsubishi FX5U base unit via a serial interface (RS422 or RS485)? And which protocols do I need to select?
  40. Schellenberger started following How to Connect Beijer E300 Terminal to Mitsubishi FX5U
  41. 무료토렌트 링크고.COM 무료 토렌트 changed their profile photo
  42. 링크사이트 링크고.COM 링크 사이트 changed their profile photo
  43. @asteroidehk I am curious the PLC String tag you're trying to write to.  What is its .len data item value? If zero have you tried loading something non-zero and see what happens.
  44. Hello The language changes OK in the panel with Language Switch Button. I need to let the PLC to know which language is active in the Panel. Controller Tag:                           Type Current_Language_String        String Current_Language                     DINT I have FactoryTalk View ME v11 I have a string display in the panel that shows en-US or es-MX according the language selected, but I cant send this to the PLC. I have done many combinations without success. Thanks in advance

  45. 12 hour long Timer Function - NX1P2

    Craig McCanada replied to Craig McCanada's topic in NJ Series / Sysmac Studio

    Thank you DonNH, this is exactly what I was looking for!
  46. Craig McCanada liked a post in a topic: 12 hour long Timer Function - NX1P2
  47. I have a setup the contains the following components that are locally connected through an Ethernet switch: FX5U PLC ------------------------ IP: 192.168.10.10 GOT GS2107 -------------------- IP: 192.168.10.18 2x DAQ LabJack T7 pro ------ IP: 192.168.10.13     and      192.168.10.15 My laptop ------------------------- IP: 192.168.10.11 I am using the DAQs to be able to read many Analog signals. The DAQs working as servers, which the PLC is the client which are connected through Simple CPU Communication function in Gx Works3. The PLC is reading the holding registers in the DAQs at a specific timing rate (100ms default). I tested the communication and it is working good. Here is the problem: If the laptop is connected to the network during the communication, the communication is time out after a some time (few minutes up to like 30 minutes). I checked this through the Simple CPU Communication Diagnostics as shown in the photo. I don't know why this happening. I tried many things including: 1. Reduce the communication execution interval. Instead of 100ms, I changed it to be 200ms. -------- Still have the same issue. 2. I tried to avoid connecting the laptop to the Ethernet network by connecting the PLC through the GOT which has a USB port, and it is working without timeout. I mean I can program, monitor, and watch the PLC by the laptop through the USB connection to the GOT. However, I want to log some data using the CPU Module Configuration Tool software, which supports only Ethernet connection to the PLC. Also, I want to use the real time monitoring through the GX Logviewer software, which also supports Ethernet connection only. 3. I have setup the External Device configuration to have MELSOFT Connection module and two active connection module, but still have the same issue. Another annoying point is that I cannot detect the status of the connection. I have to keep watching the Simple CPU Communication diagnostics. Could you please help me to solve this issue. Regards, HZ Image.jfif
  48. Cloudsicker changed their profile photo
  49. 사이트순위 링크고.COM 사이트 순위 changed their profile photo

  50. FactoryTalkView- CurrentLanguage to PLC

    ElectronGuru replied to asteroidehk's topic in Allen Bradley / Rockwell Automation

    "Send current language to PLC"?  Are you trying to change the language on the HMI displays? Or are you trying to let the PLC know when the HMI display language has changed? Is this for FactoryTalk ME or SE? (I'm assuming SE, but want to be sure).
  51. Load more activity